nike carbon fiber soccer cleats
|
|
C-Cleats Blue Carbon Fiber Cam Cleat 5/8 Li $41.94 C-Cleats Blue Carbon Fiber Cam Cleat 5/8″ Li Ronstan C-Cleats – BLUE CARBON FIBER CAM CLEAT 5/8″ LI |
|
|
C-Cleats Carbon Fiber Cam Cleat 1/2 Yellow $25.94 C-Cleats Carbon Fiber Cam Cleat 1/2″ Yellow Ronstan C-Cleats – CARBON FIBER CAM CLEAT 1/2″ YELLOW |
|
|
C-Cleats Carbon Fiber Cam Cleat 5/16 Yellow $21.94 C-Cleats Carbon Fiber Cam Cleat 5/16″ Yellow Ronstan C-Cleats – CARBON FIBER CAM CLEAT 5/16″ YELLOW |
|
|
Ronstan Carbon Fiber Cleats & Accessories Gray Medium $23.67 Ronstan Carbon Fiber Cleats & Accessories Gray Medium . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Blue Large $39.15 Ronstan Carbon Fiber Cleats & Accessories Blue Large . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Blue Medium $23.67 Ronstan Carbon Fiber Cleats & Accessories Blue Medium . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Gray Small $20.03 Ronstan Carbon Fiber Cleats & Accessories Gray Small . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Blue Small $20.03 Ronstan Carbon Fiber Cleats & Accessories Blue Small . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ball Bearing Cam-Matic Cleats Carbon Fiber Low Profile Cam Cleat $24.94 Ball Bearing Cam-Matic Cleats Carbon Fiber Low Profile Cam Cleat Harken Ball Bearing Cam-Matic Cleats – CARBON FIBER LOW PROFILE CAM CLEAT |
|
|
C-Cleats Carbon Fiber Cam Cleat 1/2 Blue $25.94 C-Cleats Carbon Fiber Cam Cleat 1/2″ Blue With carbon fiber composite cams, the popular Ronstan C-Cleats are designed for easy cleating and releasing of control lines under every application and load condition. The unique tooth profile and cam geometry are designed to grip without damaging the line. Cam spring pressure is highest when the cams are nearly closed, ensuring secure cleating of even the smallest lines. Made of a carbon fiber composite – strong, light, and corrosion-free Available in a wide assortment of colors to allow for color coding of functions |
|
|
C-Cleats Carbon Fiber Cam Cleat 5/16 Green $21.94 C-Cleats Carbon Fiber Cam Cleat 5/16″ Green With carbon fiber composite cams, the popular Ronstan C-Cleats are designed for easy cleating and releasing of control lines under every application and load condition. The unique tooth profile and cam geometry are designed to grip without damaging the line. Cam spring pressure is highest when the cams are nearly closed, ensuring secure cleating of even the smallest lines. Made of a carbon fiber composite – strong, light, and corrosion-free Available in a wide assortment of colors to allow for color coding of functions |
|
|
Ronstan Carbon Fiber Cleats & Accessories Saddle With Stainless Liner, Black $3.99 Ronstan Carbon Fiber Cleats & Accessories Saddle With Stainless Liner, Black . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Saddle With Stainless Liner, Gray $4.69 Ronstan Carbon Fiber Cleats & Accessories Saddle With Stainless Liner, Gray . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Heavy Duty Fairlead, Gray $8.29 Ronstan Carbon Fiber Cleats & Accessories Heavy Duty Fairlead, Gray . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Fast Track Fairlead (small) $5.56 Ronstan Carbon Fiber Cleats & Accessories Fast Track Fairlead (small) . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Riser/curved Suface Adapter (medium) $5.92 Ronstan Carbon Fiber Cleats & Accessories Riser/curved Suface Adapter (medium) . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Wedge Kit (medium) $4.55 Ronstan Carbon Fiber Cleats & Accessories Wedge Kit (medium) . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |
|
|
Ronstan Carbon Fiber Cleats & Accessories Rope Guide (medium) $6.37 Ronstan Carbon Fiber Cleats & Accessories Rope Guide (medium) . Made of lightweight carbon fiber, C-Cleats are light, strong, simple, long-lasting and abrasion-resistant. Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Fast Track Fairleads: Easily fitted to the cleat, this one-piece fairlead offers precise cleating and release from any angle, and lower entry resistance for off-center cleating. Made from composite material, this compact, low-profile design will not catch lines or clothing. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat. Wedge Kits: Used in some applications to provide correct alignment, wedge kits can be stacked in opposite directions to create a parallel riser. Use up to three for 11, 22, or 33 tilt. Small C-cleats require two 4mm (#10) FHMS. Hole Spacing: 1-1/16″. Height: 3/4″. Line Size: 3/32″ 5/16″. SWL: 265lb. Medium C-cleats require two 5mm (3/16″) FHMS. Hole Spacing: 1-1/12″. Height: 1″. Line Size: 1/8″ 1/2″. SWL: 400lb. Large C-cleats require two 6mm (1/4″) FHMS. Hole Spacing: 2″. Height: 1-/8″. Line Size: 1/4″ 5/8″. SWL: 510lb. |